Call us on
+45 87 73 40 41
Press the below illustrations for full scale view
A hydraulic floor scraper is normally used with woodchips. The woodchips are loaded in a container, and the floor scraper will automatically push the woodchips to the cross screw where strong screws will convey the fuel into the combustion plant.
A hydraulic floor scraper is normally used with woodchips.
The woodchips are taken to the store room, and the floor scrapers will automatically push the woodchips into the cross screw where strong screws will convey the fuel into the combustion plant.
Normally, the heating with wood pellets requires a silo with an air injection duct and a cyclone; the pellets will slide down the transportation screw and be conveyed into the plant.
Normally, a silo feeder is used when heating with woodchips. The woodchips are transported into the store room and tipped onto the silo feeder; the specially designed springs with a diameter of 2.85mtrs will move the woodchips towards the strong screw conveying the woodchips into the burner.
Contact us for more information
The company
Lekea - Dan Trim ApS
CVR: 32284205
Address
Højvejen 18
DK-8860 Ulstrup
Contact us
Tlf.: +45 87 73 40 41
E-mail: post@lekea.dk